Termoigrometro digitale moderno e semplice con lancetta quadrata e ampio display LCD, sveglia da tavolo o decorazione per la casa.

Modern Simple Electronic Square Needle Clock Big LCD Digital Thermometer Hygrometer Desktop Alarm Clock Home Wall Decoration Main Features: 5 buttons: [ALARM] [SET] [DOWN] [UP] [SNOOZE] Moving hands display Calendar display:2000.01.01~2099.12.31 Time standard 12HR/24HR display selection Weekdays display with seven languages Indoor temperature Indoor humidity Alarm clock function Snooze function Temperature display format selection (°C/°F) Power supply:3×1.5V “AAA”(Not Included) Temperature and humidity detection instructions: Indoor temperature detection range: 0°C to +50°C (+32°F to+122°F). The detection of indoor temperature is below 0 °C (32 °F), which is shown as LL. L °C (LL. L °F). Above + 50 (122 °F) is shown as HH. H °C (HH. H °F). Indoor humidity range: 20%～95%. Indoor temperature and humidity detection cycle is 60 seconds. When the alarm clock rings, temperature and humidity detection is not conducted, also indoor temperature and humidity value is not updated. When Indoor humidity is lower than 20%, clock will be displayed at 20%. When higher than 95%, clock will be displayed at 95%. Time Setting: In standard mode, press the [SET] key to switch the time, alarm time and calendar display. In standard mode, press and hold the [SET] key for 2 seconds to enter the time and standard item setting mode. After entering, the setting item is displayed and flashes. In standard mode, press the [SET] key to confirm the setting result, and then switch to the next setting. The order of setting are as follows: default time →hour →minute →year →M/D or D/M switch →month/date →date/month →weekdays language choosing →exit. When setting hour and minute, pressing the [UP] or [DOWN] key can adjust its set value. Press [UP] or [DOWN] button 1 second, the value will increased or decreased 1 unit, hold 2 second to quickly increased or quickly decreased. Finally, press [SET] key to confirm the setting value. No operation within 20 seconds will abandon the item being set and exit the setting mode. Date format setting : Alarm and snooze setting: Press and hold the [SET] key for 2 seconds to enter the setting mode. Press the set button for three times to enter M/D or D/M setting. The M/D or D/M display will flash, press [UP] or [DOWN] to chose date format Weekdays Language: There are 7 countries in the language of the week. The setting sequence is: EN→GE→FR→SP→IT→DU→DA. Note: 1. When the display is unclear, fuzzy, flashing crazily or a battery symbol appears, it is recommended to replace the battery. 2. The product can be used for both table and wall, customers can choose freely. 3. The product has no backlight.