Bici elettrica DUOTTS N26 26" 1500w Doppio motore 48V 20Ah Batteria Samsung

Powerful Performance Explore a new era of cycling with DUOTTS N26 E-bike. Crafted with a lightweight aluminum alloy frame, a powerful 48V motor, and versatile riding modes. Experience off-road prowess with hydraulic brakes and comfortable suspension. 48V 20Ah Samsung Battery The robust battery offers 40-60 km in pure electric mode and 120-150 km in pedal-assist mode. DUOTTS N26 sets the trend, challenging the unknown and unleashing your wild side. Intelligent Motor The high-speed continuous 750W*2 brushless geared hub motor with 130 Nm of max torque, gives you maximum power and is unstoppable on bad terrains. We offer you an unprecedented driving pleasure, making every ride easy and comfortable. Exceptional Shock Absorption Dual-shoulder design: "Dual-shoulder" means that the upper part of the front fork is divided into two branches, resembling two shoulders. This design enhances the fork's rigidity and stability, contributing to more precise handling and improved suspension performance. Brand New Appearance Revolutionizing the appearance of electric bicycles, infused with a fresh and dynamic motorcycle-inspired design, showcasing avant-garde and modern aesthetics. The upgraded look of this electric bike will make you the stylish focal point of your rides, expressing individuality and taste. Specification: Brand: DUOTTS Type: Electric Bike Model: N26 Color: Black/White Frame: 26" aluminum alloy frame Waterproof grade: IPX4 Battery: 48V 20Ah Samsung battery Motor: 48V 750W*2 (Motor brand: PY) Speed: Shimano 7 speed Display: 5-speed multifunction LCD Riding modes: Pure electronic mode, pedal-assisted mode, riding mode Brake: DYISLAND hydraulic brake Seat tube: Aluminum alloy Tire: 26*4.0" inflatable tires Fenders: front and rear fenders Throttle: 158DX Electric Half-twist Throttle With rear rack Max climbing angle: 55° Charging time: 8-10 hours Size of N26 battery: 35*12*9cm, Net weight: 5.5kg Foldable: No Max load: 150kg Suitable height: 170-200cm Max speed: 55km/h Saddle height: saddle distance from the ground 89-102cm Charger: 54.6V 2A (Input: 110V-240V) Controller: Sine Wave Controller (48V 25A Jing Hui controller) QQ: front comtroller, HQ: rear controller Disc diameter: 160mm Range: pure electronic mode 40-60km, pedal-assisted mode 120-150km (Depending on road conditions, speed, and driver's weight) Suspension: Front rear spring shock absorbers (not adjustable) Front fork travel: 120cm Front fork travel: 120cm Product Weight: 39.6kg Package Weight: 48kg Product Size(L x W x H): 190x113x71cm Package Size(L x W x H): 157x34x82cm Package Contents 1 x Electric Bike 1 x Battery 1 x Charger 1 x Tool Kit 1 x User Manual EU/UK Countries Can be delivered within 4-7 Days.You don't have to pay delivery fee. All bikes 90% have been installed, one year warranty on the frame, six months warranty on the battery, controller, instrumentation, etc. If you encounter any problems when you receive the product, please contact our professional after-sales customer service first. Italy After Sale Point: Weimiao ji Via Ramiro ortz 6/3 65126 pescara IT 3778179737 Before you go to the repair store ,please contact us first. Email: lijuping@gunai.store Whatsapp: +86 17841010701 Common bicycle problems and solutions Q: Error code appears on the meter A: Check the manual to see what kind of fault the error code belongs to, follow the instructions to handle it, and if it still doesn't work, provide error code pictures/videos. Q: Charger doesn't work A: First check whether the charger is green or red to green when charging; if the green light is always on, it may be a problem with the charger/charging port/battery, and if the red to green light indicates that the charger is normal, it may be a meter problem. Q: The meter can't be turned on A: Check whether the meter line/controller line is plugged in tightly, and re-plug it; if it doesn't work, it may be a problem with the meter/main line/controller Q: Pedal assist doesn't work A: Check whether the meter parameters are correct, confirm whether the throttle can work, and whether the sensor line is damaged or loose; if all are correct, replace the sensor Q: Rear wheel shakes A: Check whether the spokes are loose and whether they are installed in place; you can tighten the spokes and reinstall the rear wheel. Q: Motor does not work/has strong noise A: Check if the controller is loose, re-plug the motor cable of the rear wheel; provide a video of the noise for the technician to determine what the sound is. Q: Battery does not work/battery life is insufficient A: Measure the battery voltage after fully charging the battery (provide pictures). If the voltage is abnormal, there may be a problem with the battery/battery cover/circuit board. For battery life issues, customers test the battery life under full charge and provide the VOL when fully charged, the ODO (total mileage) when fully charged, the VOL when the battery is exhausted, and the ODO (total mileage) when the battery is exhausted. Q: Pedals cannot be installed A: Check if the left and right pedals are installed/twisted in reverse order. If so, check if the crank/pedal threads are slipped. If slipped, the crank pedals need to be replaced. Q: Brakes don’t work/are not sensitive/leak oil A: Adjust the brakes first/check if the brake pads are worn, if there is oil on the brake pads or discs, insufficient friction/is the brake line loose/leak oil, then you need to replace the brakes directly Q: There is an abnormal sound from the brakes A: It may be the sound of wiping the disc. Ask the customer to check if the disc is deformed. If it is not deformed, adjusting it can solve the problem. The disc is stuck in the middle of the brake (with a gap), not too close to the left or right side of the brake Q: The riser is loose and has a gap A: Check if the headset is aligned and installed, and adjust the headset; if it doesn’t work, replace a headset Common problems and solutions for scooters Q: The meter cannot be turned on A: First check if the line on the back of the meter is plugged in tightly, and re-plug it; if the meter still cannot be turned on after the operation, send a replacement to the customer Instrument/Check if the instrument fuse is burnt out/Check if the instrument or switch plug pin is broken Q: Motor does not work A: If it is a dual motor, swap the front and rear controllers to see if the non-working motor will work normally; Q: Abnormal noise from the motor A: Check if there is an error code on the screen, and provide a video for the technician to determine if the abnormal noise is normal Q: Headlight flickers or does not work A: Check if the line is loose, and re-plug the interface; the step-down board of the light strip may be burned/check if the light switch is available, if not, replace the switch Q: Steering/taillight does not work A: Re-plug the line, if it does not work, re-issue the accessories Q: Brake failure A: Check if the instrument has an error prompt, if so, the brake power-off switch may be faulty, and the power-off switch needs to be replaced; or check if the brake pads are worn out and the brake line is loose Q: Error code appears on the instrument A: Check the corresponding manual to see what kind of fault the error code belongs to, and operate according to the instructions. If it still does not work, provide error code pictures/videos. Q: The charger does not work A: First check whether the charger is green or red-to-green when charging; if the green light is always on, it may be a problem with the charger/charging port/battery, and if the red-to-green light is normal, it may be a problem with the instrument.