Pompa elettrica per gonfiare palloncini: gonfia i palloncini simultaneamente con 2 modalità per decorare la stanza.

This product has two gears: 1. The first gear has two air outlets working simultaneously, which can inflate two balloons at the same time. However, please do not use this gear for a long time. Please rest for five minutes after using it for ten minutes to avoid overheating of the product. 2. The second gear is micro mode, in which the left hole does not work and the right hole automatically inflates when it comes into contact with the balloon. This gear can be used for a long time. Features: 1. Compact and exquisite, easy to carry, simple and practical, portable operation. 2. Hidden wire storage room, portable storage of power cords, not messy. 3. Two inflatable modes, two small extension nozzles, convenient to inflate different balloons. 4. With thoughtful cooling function to meet your different needs. 5. One button switch, plug in the power supply, gently press the switch button to start working. 6. This product has been scientifically designed, multiple tests, powerful and safe. Operating Method 1. Open the cover on the right side of the inflatable tube and take out the wire inside. 2. Plug in the power supply and gently press the switch. 3. Gently press the nozzle to put on the balloon for 3 seconds to finish inflating. 4. The balloon is inflated. Product Parameters Working voltage: 220V Power: 600W Airflow: 400L/MIN Caveats: 1.Due to differences in monitors, there may be slight differences between the actual product and the image. We apologize for any inconvenience caused. 2. Please allow for slight measurement errors. 3. Do not fall from a height to the ground. 4. If the balloon thickness is too thick or the size is too large, double layered balloons or balloons with excessive weight may not be able to inflate. If you want to inflate thick or double layered balloons, please use products with higher power. 5. Please use the product normally, add a small nozzle, correctly tighten the balloon and attach it to the air outlet before starting to inflate. If the air inlet of the balloon is not tightly pressed, it will cause gaps in the air inlet, leading to air leakage.