Monopattino elettrico fuoristrada KuKirin G4 Max, motore brushless 2*1600W, 12 pollici

600W*2 High-Performance Dual-drive Motor Kukirin G4 MAX is equipped with 60V/1600W*2 motors, it can provide powerful power and torque, making acceleration and climbing easier. The maximum speed can reach 86km/h, which makes it a very fast and exciting electric scooter. Multifunctional Intelligent Display The multi-functional intelligent display integrates multiple functions, including speed display, battery indicator, fault diagnosis, mileage recording, etc. Supports a variety of personalized settings, such as backlight brightness adjustment, startup mode adjustment, etc., to meet the usage habits and needs of different drivers. Front & Rear Four-piston Oil Brakes The front and rear four-piston oil brakes realize braking through the principle of hydraulic pressure. They have the characteristics of stable braking performance, fast response speed, good heat dissipation performance and short braking distance. They can effectively cope with emergency braking situations at high speeds and provide drivers with Provides safer driving guarantee. Front & Rear Dual Hydraulic Damping Shock Absorption The front and rear hydraulic damping and shock-absorbing systems can better cope with bumps and uneven road surfaces, reducing the impact on the driver and providing a smoother and more natural driving experience. 12-inch Off-road Pneumatic Tire 12-inch ultra-wide off-road pneumatic tires have wider treads and off-road tread patterns, which can provide better grip and traction, shock absorption and buffering effects, absorb vibrations caused by uneven road surfaces, and improve driving comfort. Specification: Brand: Kukirin Type: Electric Scooter Model: G4 Max Frame material: Aluminium alloy Speed: 36km/h 66km/h 68km/h (single drive), 38km/h 70km/h 86km/h (dual drive) Mileage: 95km Climbing ability: 38° Brake system: Front and rear piston oil brake Brake distance: 6-8m Waterproof grade: IP54 Motor: 1600W (2000W Max) Max output torque: 41N.M Battery: 60V 35.2AH LED headlight: 2*6W Front shock absorber: Hydraulic upside-down shock absorber Rear shock absorber: Hydraulic shock absorber Tire: 12-inch off-road pneumatic tires Input voltage: AC200-240V~50/60Hz Input current: 5A Output voltage: 67.2V Output current: 5A Max load: 150kg Product Weight: 64kg Package Weight: 78kg Product Size(L x W x H): 1425*640*1340mm Package Size(L x W x H): 1470*350*750mm Package Contents 1 x Electric scooter 1 x Bag 1 x Tool bag 1 x Inflator pump 1 x Charger 1 x User Manual EU/UK Countries Can be delivered within 4-7 Days.You don't have to pay delivery fee. If you encounter any problems when you receive the product, please contact our professional after-sales customer service first. Italy After Sale Point: Weimiao ji Via Ramiro ortz 6/3 65126 pescara IT 3778179737 Before you go to the repair store ,please contact us first. Email: lijuping@gunai.store Whatsapp: +86 17841010701 Common bicycle problems and solutions Q: Error code appears on the meter A: Check the manual to see what kind of fault the error code belongs to, follow the instructions to handle it, and if it still doesn't work, provide error code pictures/videos. Q: Charger doesn't work A: First check whether the charger is green or red to green when charging; if the green light is always on, it may be a problem with the charger/charging port/battery, and if the red to green light indicates that the charger is normal, it may be a meter problem. Q: The meter can't be turned on A: Check whether the meter line/controller line is plugged in tightly, and re-plug it; if it doesn't work, it may be a problem with the meter/main line/controller Q: Pedal assist doesn't work A: Check whether the meter parameters are correct, confirm whether the throttle can work, and whether the sensor line is damaged or loose; if all are correct, replace the sensor Q: Rear wheel shakes A: Check whether the spokes are loose and whether they are installed in place; you can tighten the spokes and reinstall the rear wheel. Q: Motor does not work/has strong noise A: Check if the controller is loose, re-plug the motor cable of the rear wheel; provide a video of the noise for the technician to determine what the sound is. Q: Battery does not work/battery life is insufficient A: Measure the battery voltage after fully charging the battery (provide pictures). If the voltage is abnormal, there may be a problem with the battery/battery cover/circuit board. For battery life issues, customers test the battery life under full charge and provide the VOL when fully charged, the ODO (total mileage) when fully charged, the VOL when the battery is exhausted, and the ODO (total mileage) when the battery is exhausted. Q: Pedals cannot be installed A: Check if the left and right pedals are installed/twisted in reverse order. If so, check if the crank/pedal threads are slipped. If slipped, the crank pedals need to be replaced. Q: Brakes don’t work/are not sensitive/leak oil A: Adjust the brakes first/check if the brake pads are worn, if there is oil on the brake pads or discs, insufficient friction/is the brake line loose/leak oil, then you need to replace the brakes directly Q: There is an abnormal sound from the brakes A: It may be the sound of wiping the disc. Ask the customer to check if the disc is deformed. If it is not deformed, adjusting it can solve the problem. The disc is stuck in the middle of the brake (with a gap), not too close to the left or right side of the brake Q: The riser is loose and has a gap A: Check if the headset is aligned and installed, and adjust the headset; if it doesn’t work, replace a headset Common problems and solutions for scooters Q: The meter cannot be turned on A: First check if the line on the back of the meter is plugged in tightly, and re-plug it; if the meter still cannot be turned on after the operation, send a replacement to the customer Instrument/Check if the instrument fuse is burnt out/Check if the instrument or switch plug pin is broken Q: Motor does not work A: If it is a dual motor, swap the front and rear controllers to see if the non-working motor will work normally; Q: Abnormal noise from the motor A: Check if there is an error code on the screen, and provide a video for the technician to determine if the abnormal noise is normal Q: Headlight flickers or does not work A: Check if the line is loose, and re-plug the interface; the step-down board of the light strip may be burned/check if the light switch is available, if not, replace the switch Q: Steering/taillight does not work A: Re-plug the line, if it does not work, re-issue the accessories Q: Brake failure A: Check if the instrument has an error prompt, if so, the brake power-off switch may be faulty, and the power-off switch needs to be replaced; or check if the brake pads are worn out and the brake line is loose Q: Error code appears on the instrument A: Check the corresponding manual to see what kind of fault the error code belongs to, and operate according to the instructions. If it still does not work, provide error code pictures/videos. Q: The charger does not work A: First check whether the charger is green or red-to-green when charging; if the green light is always on, it may be a problem with the charger/charging port/battery, and if the red-to-green light is normal, it may be a problem with the instrument.