Massaggiatore elettrico riscaldante con airbag, impastamento, massaggio rilassante, sollevamento, impacco caldo, tutore per piede e caviglia senza fili

Features: 1. This portable foot ankle massager provides three airbag massage modes — Foot Soothing, Kneading Relaxation and Lifting Massage — to effectively relieve tension in your feet and ankles. 2. With four levels of air compression intensity (from low to high), our cordless foot massage device allows you to adjust the pressure to your preferences. 3. The foot massager has four heat settings (40°C/45°C/50°C/55°C ± 5°C). You can enjoy a hot compress alone or combine the heating function with massage for spa-like therapy. 4. This wireless portable massager automatically shuts off after 15 minutes of use to avoid overuse, ensuring safe and scientific usage. 5. This heated ankle wrap uses dual-area airbag massage and warmth to target both the plantar fascia and the ankle, promoting better circulation to relieve foot fatigue and swelling. 6. Powered by a 3000mAh high-capacity battery, this airbag ankle brace lasts up to 1.5 hours of use per charge. 7. Measuring 24.5 cm in length and 10.5 cm in width, the foot massage device can accommodate most foot sizes, ensuring a comfortable massage experience for a wide range of users. Specifications: Product Name: Dual-Airbag Foot and Ankle Massager Material: Main unit: ABS; Fabric: diving fabric + glue-coated fabric Battery Type: Lithium-ion battery Battery Capacity: 3.7V 3000mAh/11.1Wh Rated Voltage: 3.7V Rated Power: 7W Charging Current: 1A Charging Voltage: 5V=1A Charging Time: ≤3.3h Usage Time: 1.5h-5h (Full load at heating Level 1) Timer: 15 minutes Charging Status: The screen will display a scrolling number "8" during charging. When fully charged, the display shows “--”. Do not use while charging; only use when not charging Main Unit Care: Properly protect the main unit display screen. Clean the main unit with a soft cloth. Fabric Area Care： Fabric areas are not machine washable. For cleaning and maintenance, use alcohol to disinfect and remove sweat stains or wipe with a clean, damp towel. Operation steps: 1. Before use, please check if the massager can be started. If it cannot be started, please first charge the massager with the included charging cable before use. 2. Separate the adhesive parts of the massager Velcro to fully unfold the product. 3. Tie the massager to the ankle area of the lower limbs, with the correct wearing direction being the main button facing up and the digital screen facing down. After adjusting the elasticity that suits oneself, it can be used. Note: The product can be used through clothing. 4. After long pressing the power button to start, it defaults to 0 gear. Short press the strength button to select 4 different strengths, adjusting them from 1 to 4 in sequence (from low to high). 5. In the startup state, press the mode key to switch between three massage modes (foot soothing, kneading relaxation, and lifting massage) to choose from 6. In the startup state, short press the heating button to activate the heating mode. There are four temperature levels available (four temperature indicator lights correspond to 40, 45, 50, and 55 ℃± 5 ℃ from left to right and low to high, respectively), which can be adjusted as needed. Heating and massage modes can be used simultaneously. 7. After starting, the host will automatically shut down after 15 minutes of operation, and the refresh time will be refreshed by pressing the buttons during this period. Automatically shut down when the battery level drops below 2.8V during operation 8. Charging does not work, the number 8 races during the charging process, and the light goes out after being fully charged. Packing List: 1* Foot and Ankle Massager 1* Instruction Manual 1* Type-C Charging Cable