Adattatore per box per hard disk da NVMe Type-A M.2 a USB 3.1 con connessione diretta

Product Specifications Product name: NVME to USB3.1 type-A 2-in-1 direct plug adapter card Supported M.2 SSD: M.2 NVME protocol drive Regarding how the ANCI protocol distinguishes: The PCI-E AHCI protocol is for SSDs manufactured before 2015. Secondly, there will be a label on the SSD indicating this. If you see the words "PCI-E AHCI," then it is compatible.The method of distinction is also very simple Chip: JMS583 TYPEC 3.1 Supports almost 99% of NVME M.2 SSDs currently on the market External interface: USB3.1 Type-A direct plug-in interface Backwards compatible with USB 3.0 and USB 2.0 interfaces, it supports both USB 2.0 and 3.0 interfaces. Of course, if you connect to 2.0, it will run at 2.0 speed, and if you connect to 3.0, it will run at 3.0 speed Reading speed: 10GB/s This data is for reference only The actual reading speed is mainly related to the SSD and the device; different SSDs on the same device yield different test results Accessories 1. As shown in the picture, adapter card x1 2. Screwdriver 3. Install the screws 4. Optional cooling silicone patch x1 5. TYPE-C adapter optional