Bici elettrica da città ONESPORT OT05, motore da 250 W, batteria da 36 V 18,2 Ah, pneumatico da 27,5*2,25 pollici, motore ad alta velocità da 250 W

The advanced brushless ANANDA2s0 high-speed gear motor provides stable power to take your riding performance to a new level, allowing you to experience a higher level of riding pleasure. It supports a maximum speed of 25 km/h, making it a simple solution for your daily commuting and travel needs. Torque sensor The torque sensor makes the electric vehicle riding experience more natural and smooth, the power output is more linear and smooth, and the intention of the motor is almost imperceptible. When going uphill or downhill, the sensor can adjust the power output in real time to avoid excessive power assistance and cause loss of control, prevent riding too fast, and improve riding safety. 36V 18.2Ah battery The OT05 electric bicycle adopts an integrated battery design with a streamlined appearance, which not only enhances the beauty of the bicycle. It also protects the bicycle from the influence of bad weather and provides a long-lasting and durable battery for your riding adventure. The range in pure electric mode is 0 kilometers, and the range in pedal mode is 120 kilometers. There is no need to worry about the range, and you can easily conquer long-distance riding. Hydraulic Disc Brakes Experience the superior braking capabilities of our OT05 e-bike Hydraulic brakes, which are responsive and can stop in time even when riding at high speeds, with better control and reliability. Whether you are riding on busy city streets or driving up steep hills, these brakes ensure safe riding conditions. Shimano 7-speed and safety light ONESPORT OT05 e-bike is equipped with shimano 7-speed, providing a smooth riding experience, allowing you to quickly adapt to riding speeds on different terrains and easily cope with different terrains. Bright front and rear lights can improve visibility on night roads, ensuring safe riding. Specification Tire: 27.5*2.25 inflatable tires Maximum Speed: 25km/h (can unlock to 32km/h) Mileage: 60-120km Maximum Climbing Angle: 20 degree Waterproof Level: IPX5 Battery Type: 18650 battery cell Battery Capacity: 18.2AH Battery Rated Voltage: 36V Motor Form: Assist mode Motor: 250W Charger Output: 54.6V 2A Charger Input: 110V-240V Charging Time: 8-10 hours Instrument Display: 3-speed multi-function LCD with Bluetooth Front Lighting: YES Braking Method: integrated oil disc power off brake handle Gear: Shimano 7 speed Product Weight: 28kg Package Weight: 35.5kg Package Size: 148 x 24 x 79cm Package Contents 1 x E-bike 1 x Charger 1 x User Manual EU/UK Countries Can be delivered within 4-7 Days.You don't have to pay delivery fee. All bikes 90% have been installed, one year warranty on the frame, six months warranty on the battery, controller, instrumentation, etc. If you encounter any problems when you receive the product, please contact our professional after-sales customer service first. Email: lijuping@gunai.store Whatsapp: +86 17841010701 Common bicycle problems and solutions Q: Error code appears on the meter A: Check the manual to see what kind of fault the error code belongs to, follow the instructions to handle it, and if it still doesn't work, provide error code pictures/videos. Q: Charger doesn't work A: First check whether the charger is green or red to green when charging; if the green light is always on, it may be a problem with the charger/charging port/battery, and if the red to green light indicates that the charger is normal, it may be a meter problem. Q: The meter can't be turned on A: Check whether the meter line/controller line is plugged in tightly, and re-plug it; if it doesn't work, it may be a problem with the meter/main line/controller Q: Pedal assist doesn't work A: Check whether the meter parameters are correct, confirm whether the throttle can work, and whether the sensor line is damaged or loose; if all are correct, replace the sensor Q: Rear wheel shakes A: Check whether the spokes are loose and whether they are installed in place; you can tighten the spokes and reinstall the rear wheel. Q: Motor does not work/has strong noise A: Check if the controller is loose, re-plug the motor cable of the rear wheel; provide a video of the noise for the technician to determine what the sound is. Q: Battery does not work/battery life is insufficient A: Measure the battery voltage after fully charging the battery (provide pictures). If the voltage is abnormal, there may be a problem with the battery/battery cover/circuit board. For battery life issues, customers test the battery life under full charge and provide the VOL when fully charged, the ODO (total mileage) when fully charged, the VOL when the battery is exhausted, and the ODO (total mileage) when the battery is exhausted. Q: Pedals cannot be installed A: Check if the left and right pedals are installed/twisted in reverse order. If so, check if the crank/pedal threads are slipped. If slipped, the crank pedals need to be replaced. Q: Brakes don’t work/are not sensitive/leak oil A: Adjust the brakes first/check if the brake pads are worn, if there is oil on the brake pads or discs, insufficient friction/is the brake line loose/leak oil, then you need to replace the brakes directly Q: There is an abnormal sound from the brakes A: It may be the sound of wiping the disc. Ask the customer to check if the disc is deformed. If it is not deformed, adjusting it can solve the problem. The disc is stuck in the middle of the brake (with a gap), not too close to the left or right side of the brake Q: The riser is loose and has a gap A: Check if the headset is aligned and installed, and adjust the headset; if it doesn’t work, replace a headset Common problems and solutions for scooters Q: The meter cannot be turned on A: First check if the line on the back of the meter is plugged in tightly, and re-plug it; if the meter still cannot be turned on after the operation, send a replacement to the customer Instrument/Check if the instrument fuse is burnt out/Check if the instrument or switch plug pin is broken Q: Motor does not work A: If it is a dual motor, swap the front and rear controllers to see if the non-working motor will work normally; Q: Abnormal noise from the motor A: Check if there is an error code on the screen, and provide a video for the technician to determine if the abnormal noise is normal Q: Headlight flickers or does not work A: Check if the line is loose, and re-plug the interface; the step-down board of the light strip may be burned/check if the light switch is available, if not, replace the switch Q: Steering/taillight does not work A: Re-plug the line, if it does not work, re-issue the accessories Q: Brake failure A: Check if the instrument has an error prompt, if so, the brake power-off switch may be faulty, and the power-off switch needs to be replaced; or check if the brake pads are worn out and the brake line is loose Q: Error code appears on the instrument A: Check the corresponding manual to see what kind of fault the error code belongs to, and operate according to the instructions. If it still does not work, provide error code pictures/videos. Q: The charger does not work A: First check whether the charger is green or red-to-green when charging; if the green light is always on, it may be a problem with the charger/charging port/battery, and if the red-to-green light is normal, it may be a problem with the instrument.