HNHU Ventola per case PC da 120 mm, ventola di raffreddamento a 6 pin con LED RGB, necessita di essere abbinata a un controller, ventola silenziosa, 12V

Package: Color Box (Case fan*1kit,  Accessories screws*1 kit,  )Packing list(Sketch Map)：①②③ Brand Name：HNHU Size: 120 × 120 × 25mm Speed: 650-1800RPM ± 10% Airflow: 47.2CFM ± 10% Wind pressure: 1.60mmH2O ± 10% Noise: 6-30dBA Fan interface: 6 pins Rated voltage of lighting: 5V DC Rated current of the light: 1.4A Rated voltage of fan: 12V DC Rated current of fan: 0.25A ± 10% Kind reminder: The product needs to be used with a controller. The parameters are subject to actual parameters and are subject to change without prior notice The following is the fan size hole spacing selection diagram The following diagram is an installation schematic The following is an introduction to the functions of the remote control buttons 1 represents power on/motherboard switching 2 represents fan speed+ 3 represents fan speed- 4 represents mode+ 5 represents mode- 6 represents continuous pressing for 10 times to enter RGB sequence adjustment. Press the red key until it appears red, then press the green key until it appears green, and then press the off 7 represents static color key 8 represents static brightness- 9 represents static brightness+ 10 represents off 11 represents automatic mode cycle Refer to the diagram for the installation method of the chassis fan Hydraulic bearing fan Product image display: