Pompa elettrica per pneumatici con luce LED che si spegne automaticamente e pressione preimpostata.

[Product name]: Automotive air pump - touch type [Product size]: 201 * 83 * 185mm [Product material]: ABS [Product weight]: Gross weight (about) 975g ± 10g [Power cord length]: about 300 cm trachea length about 50cm [Product packaging]: 210 * 90 * 200mm [Output power]: 120 (W) [Cylinder diameter]: 23 cylinders [Rated voltage]: DC12 (V) [Lighting]: LED [Outer box size]: 43.5 * 38 * 42 (H) cm 15.6kg/16.6kg [Number of outer boxes]: 16pcs/ctn [Product features]: 1. Suitable for 12V car tires 2. Suitable for motorcycles, bicycles, balls, rubber boats, beach floating beds, inflatable toys, etc 3. For use on highways, in the field or in the early morning, if the tire suddenly leaks or the tire is injected, it can be used for first aid 4. Maintain correct tire pressure to ensure driving safety, save gasoline, and use it in the car, just in case 5. Equipped with a complete set of inflatable nozzles, it can be used for tires, rubber boats, air cushions, inflatable toys, balls, etc [Instructions for use]: 1. Plug the air nozzle on the rubber tube head directly into the tire valve. When you hear the sound of the tire leaking, it means that the air is circulating. Continue to tighten the air nozzle. At this time, the air will no longer leak out. 2. Insert the DC12V cigarette lighter 3. When inflating, the meter pointer increases with the increase of tire saturation. When the pointer reaches the appropriate tire pressure (the tire pressure of a general car tire is 223kpa = 35PSI), take out the plug and air nozzle to complete the work 4. Use the professional ball needle and plastic nozzle equipped with this machine to connect with the air nozzle to inflate the balls and other equipment that requires gas [Precautions]: 1. Do not use pneumatic tires on large and overweight vehicles, such as trucks, large trucks, box trucks, etc 2. When using, please start the car engine to enhance power and do not consume car battery power 3. Limit the use of direct current (DC12V) power supplies and do not use household high voltage AC (AC220V) power supplies 4. When inflating, please stop cooling for 10 minutes after working continuously for 10 minutes to prevent damage to the air pump and accessories and prolong the life of the motor. When the rubber boat is inflated, it can work continuously for 30 minutes 5. When the general tire is inflated, the normal tire pressure of 30PSI can be reached in about 3-5 minutes, and the time required for large tires will be slightly longer; if the instrument pointer rises rapidly to 50-100PSI when starting to inflate, it means that the air is blocked and the air does not enter the tire. At this time, you need to unplug the air nozzle connector immediately and reoperate it, otherwise the motor and meter will be easily damaged. 6. Do not leave the body during use, pay attention to the tire pressure at any time, and do not oversaturate 7. After use, the air nozzle wrench must be straightened to avoid internal rubber elastic fatigue 8. The air pump plug is equipped with a fuse. If the air pump does not start, please open the plug to check and replace it (the fuse is 15A). 9. Avoid moisture, heavy falls, and sand intrusion, and avoid children playing with it to avoid damage 10. Each tire requires a different pressure. Please refer to the label on the side of the car tire or ask the car manufacturer.