GreenYi HD 720P/1080P Visione Notturna Lente Dorata Telecamera Posteriore per Veicoli CVBS per Android DVD Monitor AHD

HD 1920*1080P Night Vision Golden Lens Vehicle Reverse Backup Rear View AHD CVBS Camera For 2019-2023 Android DVD AHD Monitor * AHD technology produces High-definition video signal, it adopts advanced Y/C signal separation and filtering technology, bright color separation, signal filtering, 3D noise reduction technology, higher image clarity and better image reproduction. * Highly integrated 2053 HD chip, Max HD 1080P resolution. 170 degrees 6 Glass Fisheye Lens. Zero-delay front-end data is not encoded and compressed to the back end, Full real-time, High fidelity. * The Camera supports both AHD and CVBS video signal, it can work with both AHD Android monitors and all CVBS TFT monitors. * Note: The AHD trajectory camera does not need CANBUS or OBD interfaces, the camera has a built-in reversing tracking module. It adjusts the guideline automatically according to the moving position and speed of car body and direction instead of steering wheel control. It only works with monitors supports AHD 720P video signal . * Chip: OV2053HD * Viewing Angle: 155~175 Degrees Visible Range . * Effective Pixels: CVBS: 1280x720P (NTSC/30HZ), AHD: 1920x1080P (PAL/25HZ) * Signal Format: NTSC or PAL * Image Resolution: 92W/200W pixels * Video Output: AHD Video Signal or CVBS Video Signal * Night Vision: Starlight Night Vision. The visible distance is greater than 10 meters. * Night Vision Image: Automatic Gain Control, Auto White Balance, Auto Backlight Compensation * Lens: 14/16MM Fisheye 6 glass Lens . * Waterproof: IP68 /IP69 * Working Power Supply: DC 12V~24V, 2A * Working Temperature: -30 °C ~ +70°C * Maximum Power: 3W Tips: 1. Because there may be slight differences between cars produced in different countries, please check the size before buying. 2. If your monitor can not support AHD video signal, please Cut the white wire change to CVBS video signal, please re-connect all cables.(The trajectory camera only supports AHD video signal) 3. When connecting the camera with a DVD player, and it does not work properly, please check if the DVD reverse trigger wire is correctly connected. Installation Steps: 1. Find a flat surface(parallel to ground) for mounting camera, then secure the nut and bolt in place. 2. Connect the power cable to reversing light power supply. 3. Connect the 6m extension wire of backup camera to the head unit/other monitors of your car. 4. Start the vehicle and gear on reverse to test the camera. 5. Re-install the head unit/other monitors.